| ComancheClub.com http://www.comancheclub.com/forums/ |
|
| New to forums and a new mj http://www.comancheclub.com/forums/viewtopic.php?f=7&t=18450 |
Page 1 of 3 |
| Author: | snowboard3r411 [ Sat Sep 12, 2009 10:59 pm ] |
| Post subject: | New to forums and a new mj |
ok so I'm a vivid cherokeeforum user but finally got ahold of a comanche worth picking up. its a 1989 2wd 5spd short bed not sure on the specs yet, cause i have not seen the truck in person yet lol i had my mom pick it up and had some pictures took. I'm picking it up next weekend or so. it has a hp 30 already swapped in i have a 4x4 cheroke for all the rest of the parts. oh ya i got it for $750.00 bucks pretty sure it was a steal but here it is           
|
|
| Author: | BlueXJ [ Sat Sep 12, 2009 11:26 pm ] |
| Post subject: | Re: New to forums and a new mj |
Nice!! Keep us up to date on the build up. Great platform to begin the build upon. |
|
| Author: | Geonovast [ Sat Sep 12, 2009 11:30 pm ] |
| Post subject: | Re: New to forums and a new mj |
Welcome to the forum! Got yourself a decent rig there. I'd check the alignment before you drive it around too much. Whoever swapped the D30 on there didn't center the steering wheel, so there's a good chance they didn't adjust the toe-in either. |
|
| Author: | snowboard3r411 [ Sun Sep 13, 2009 12:38 am ] |
| Post subject: | Re: New to forums and a new mj |
ya I'm getting rid of the front axle anyway i got a hp 30 non disc to go in i well be redoing the whole front end this is going to be my dd |
|
| Author: | Geonovast [ Sun Sep 13, 2009 12:45 am ] |
| Post subject: | Re: New to forums and a new mj |
Gearing all the same? When you put in your non-CAD axle, make sure to use the brakes that are on it. The brakes from your CAD axle won't work. |
|
| Author: | Mongo [ Sun Sep 13, 2009 11:26 am ] |
| Post subject: | Re: New to forums and a new mj |
Geonovast wrote: Gearing all the same? When you put in your non-CAD axle, make sure to use the brakes that are on it. The brakes from your CAD axle won't work. Not to be ingnorant, but what is the difference in the brake scheme between a CAD/Non CAD axle? I just never noticed. |
|
| Author: | JeepinSoldier [ Sun Sep 13, 2009 11:55 am ] |
| Post subject: | Re: New to forums and a new mj |
Love seeing these trucks come back to life! I like the bucket seats and console. |
|
| Author: | snowboard3r411 [ Sun Sep 13, 2009 1:45 pm ] |
| Post subject: | Re: New to forums and a new mj |
i was wounderin about the break lines to. as far as the intrior the guy i bought it fom started switching everything over to a 97+ style interior and i plan on finishing it that way to. |
|
| Author: | Geonovast [ Sun Sep 13, 2009 7:43 pm ] |
| Post subject: | Re: New to forums and a new mj |
There's no scheme difference per se, they're still both disc brakes and look the same, but there's several generations of brakes all with minor differences, and you can't swap back and forth, it'll cause problems. I know the exact years, it's been posted before but I don't remember what they are. |
|
| Author: | snowboard3r411 [ Tue Sep 15, 2009 10:20 pm ] |
| Post subject: | Re: New to forums and a new mj |
i love the bucket seats and consol to the guy i bought it from started to swich the interior to 97+ i still have not seen my truck in person lol its still at my moms i need a car dolly lol |
|
| Author: | snowboard3r411 [ Tue Sep 15, 2009 10:22 pm ] |
| Post subject: | Re: New to forums and a new mj |
also can anyone tell me my running gear like trans and motor. its a 1989 2wd 4 banger 5 spd short bed 
|
|
| Author: | dasbulliwagen [ Thu Sep 17, 2009 3:23 pm ] |
| Post subject: | Re: New to forums and a new mj |
snowboard3r411 wrote: also can anyone tell me my running gear like trans and motor. its a 1989 2wd 4 banger 5 spd short bed 2.5 litre 4 cylinder with throttle body fuel injection, AX5 5 speed transmission, although my 1987 came with a 5 speed shift knob and a 4 speed transmission, Dana 35 rear axle ( most likely candidate ) Good luck! |
|
| Author: | S.S.O. [ Thu Sep 17, 2009 6:27 pm ] |
| Post subject: | Re: New to forums and a new mj |
you should have 4.10s in it if you have a 4cyl |
|
| Author: | snowboard3r411 [ Thu Sep 17, 2009 10:12 pm ] |
| Post subject: | Re: New to forums and a new mj |
i want to switch to to a newer 4 bangers i have a 1993 wrangler with the 5 spd and np231 its going to be my donar can anyone help me on the swap. with the motor well the computer work from my manche with the multiport injuction? |
|
| Author: | snowboard3r411 [ Sun Sep 20, 2009 1:27 pm ] |
| Post subject: | Re: New to forums and a new mj |
anyone? |
|
| Page 1 of 3 | All times are UTC - 5 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|