TheYeti1775 Posted March 18, 2010 Share Posted March 18, 2010 Alright have the 86 MJ longbed 7', will a Ford Ranger long bed (7'3") fit it? My wife found a cheap one on Craigslist in my area and I'm not home to measure it out right now. Link to comment Share on other sites More sharing options...
comanche09 Posted March 18, 2010 Share Posted March 18, 2010 http://www.kanopykingdom.com/truck_bed_size_charts.htm Don't think it will be long enough. You want one from a 82-93 S-10. Link to comment Share on other sites More sharing options...
terrawombat Posted March 18, 2010 Share Posted March 18, 2010 That cap is going to be a bit short. I measured my 7' Comanche bed the other day and if I remember correctly, it was right around 7'6" give or take an inch. Link to comment Share on other sites More sharing options...
TheYeti1775 Posted March 18, 2010 Author Share Posted March 18, 2010 I'll measure it when I get home tonight. Link to comment Share on other sites More sharing options...
jimoshel Posted March 18, 2010 Share Posted March 18, 2010 With the interest in caps, covers, maybe there should be a thread similar to the drive shaft length one. Below is my offering. 1988MJ,LB.Sportsman by E.D. Industries, Rogersville, Mo. H=24", L=90.5", W=59.75" Image Not Found Image Not Found Image Not Found 1987 S10 LB, Ely's Pick Up Trucks. Colorado Springs, Co. H=25", L=90", W=61" Image Not Found Image Not Found Image Not Found Link to comment Share on other sites More sharing options...
comanche09 Posted March 18, 2010 Share Posted March 18, 2010 Thanks for posting that jimoshel. The MJ is wider at the front, could you get that measurement too? S-10 is same with front and rear, but it fits the MJ bed well enough. I just bought a highrise S-10 cap. Link to comment Share on other sites More sharing options...
TheYeti1775 Posted March 19, 2010 Author Share Posted March 19, 2010 Figures the Ranger one is too short. Grrrr so much for a $100 deal. Link to comment Share on other sites More sharing options...
jimoshel Posted March 19, 2010 Share Posted March 19, 2010 The front of the long box is 55.5". The rear is 54.5" This is inside the rail measurement. The rail is 2" wide. Will have the short box measurements manana. Link to comment Share on other sites More sharing options...
jimoshel Posted March 24, 2010 Share Posted March 24, 2010 Short box measurements Front 56", rear 55" I measured 5 MJ beds. I found there was as much as an inch difference in them width wise. They were not bent or distorted. Also picked up a early '90's Ranger cover. Looks like it would be a close to perfect fit for a SB MJ. Length 75.5". Width 60" Link to comment Share on other sites More sharing options...
chibrian79 Posted July 14, 2015 Share Posted July 14, 2015 Sorry to revive an old thread but I found a 1996 S-10 Longbed cap for a great deal. Any idea if this will fit a 1989 Long bed MJ? Having trouble finding dimensions to compare. Link to comment Share on other sites More sharing options...
johnj92131 Posted July 14, 2015 Share Posted July 14, 2015 For Comanche bed size and S-10 bed size numbers see post #7 in this thread: http://comancheclub.com/topic/38023-what-other-camper-shells-fit/ The short answer is the S-10 shell/cap fits, but is a bit short in height. Link to comment Share on other sites More sharing options...
chibrian79 Posted July 15, 2015 Share Posted July 15, 2015 Thanks for the link and the quick reply! Link to comment Share on other sites More sharing options...
Recommended Posts
Create an account or sign in to comment
You need to be a member in order to leave a comment
Create an account
Sign up for a new account in our community. It's easy!
Register a new accountSign in
Already have an account? Sign in here.
Sign In Now